Model's Description:
WSK Mikrus MR-300 passenger car 3D Model, Fully textured with UV Mapping and materials.
Download
WSK Mikrus MR-300 passenger car in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The Mikrus MR300 design was developed in 1957 by a team of designers from the Transport Equipment Factories in Mielec and Rzeszów. The Mikrus had a monocoque body and independent suspension of each wheel. It was propelled by a two-cylinder, two-stroke Mi300 engine designed especially for this vehicle and placed at the rear. In terms of the solutions adopted, just like the Goggomobil, the Mikrus was a miniature version of a passenger car without the use of any motorcycle parts. The design was highly simplified and consisted only of a speedometer with an odometer, control lights, an ignition switch with a starter motor switch, and a spare wheel. The complete, ready-to-drive structure weighed only 472 kg. The body has an interesting monocoque structure, built with the help of aviation technologies. Manufacturer: Transport Equipment Factory in Mielec, 1959 Inv. No.: MIM28/II-1 Model prepared on the basis of photogrammetric and ToF measurements Licence: CC BY-NC-SA - WSK Mikrus MR-300 passenger car - Download Free 3D model by Museum of Engineering and Technology, Krakow (@mitkrakow) 3D Model is ready to download for free
with 6 Texture files attached, this model contains 551602 polygons and 280068 vertices.
Model's rating is (3) based on 60 Votes.
Model's Description:
Bedzin Stone Castle (Poland) 3D Model.
Download Bedzin Stone Castle (Poland) in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The Będzin Castle is a castle in Będzin in southern Poland. The stone castle dates to the 14th century, and is predated by a wooden fortification that was erected in the 11th century. It was an important fortification in the Kingdom of Poland and later, the Polish–Lithuanian Commonwealth. (from Wikipedia) - Bedzin Stone Castle (Poland) - 3D model by dimodicART (@dimoduk) 3D Model is ready to download for free, this model contains 92582 polygons.
Model's Description:
Windmill from the village of Bogdanka, Poland 3D Model.
Download Windmill from the village of Bogdanka in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
Windmill from the village of Bogdanka near Juchnowiec (Podlasie) from 1945 translocated to the open-air museum of the Podlasie folk-cultural museum located in Wasilkow. The object is a 27-hectare area, on which more than 30 wooden objects were located.
Windmill type: wood dutch.
It is one of three objects that we have scanned together with Monika Urbańczyk at the Museum of Folk Culture. This is also my first approach to scan an object of this size.
Used: Canon 5dsr, Sigma art lens 50mm, monopod
Created in RealityCapture by Capturing Reality from 362 images in
18h:17m:05s.
https://www.artstation.com/artwork/20wLa - Windmill from the village of Bogdanka, Poland - Download Free 3D model by chromatic_swamp 3D Model is ready to download for free, this model contains 300000 polygons.
Model's Description:
Grunwald Monument in Krakow, Poland 3D Model.
Download Grunwald Monument in Krakow in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The Grunwald Monument is an equestrian statue of King of Poland Władysław II Jagiełło (1352–1434) located at Matejko Square in Krakow’s Old Town and constructed in 1910 to commemorate the 500th anniversary of the Battle of Grunwald (1410). It was designed by Polish sculptor Antoni Wiwulski and Franciszek Black and funded by renowned pianist and future Prime Minister of Poland, Ignacy Jan Paderewski. The monument was destroyed in 1939 by Nazi Germans and reconstructed in 1976 according to project by Marian Konieczny.
Pomnik Grunwaldzki - pomnik konny króla Władysława II Jagiełły (1352–1434) w Krakowie, znajdujący się na placu Jana Matejki. Został wzniesiony w 1910 z fundacji Ignacego Jana Paderewskiego według projektu Antoniego Wiwulskiego i Franciszka Blacka w 500. rocznicę bitwy pod Grunwaldem (1410). Pomnik został zburzony w 1939 przez Niemców, zrekonstruowany w 1976 według projektu Mariana Koniecznego 3D Model is ready to download for free, this model contains 1010254 polygons.
Model's Description:
Fountain in Zamość, Poland 3D Model.
Download Fountain in Zamość in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
Historical fountain in Zamość, Poland.
📍 50.7200452,23.2522932
Created with Polycam in Photo Mode 3D Model is ready to download for free, this model contains 105122 polygons.
Model's Description:
Griffin statue, Mielec, Poland 3D Model.
Download Griffin statue in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
A photogrammetry model of Griffin statue in Mielec. Original authors of the statue are Agnieszka Świerzowicz and Marek Maślaniec 3D Model is ready to download for free, this model contains 120151 polygons.
Model's Description:
Flag of Poland 3D Model.
Download Flag of Poland in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
Flag waving in the wind in a looped animation
Joint Animation, perfect for any purpose
4K PBR textures
Feel free to DM me for anu question of custom requests :) - Flag of Poland - Wind Animated Loop - Buy Royalty Free 3D model by Deftroy 3D Model is ready to download for free, this model contains 2072 polygons.
Model's Description:
Grannary 3D Model.
Download Grannary in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
3d model of old Granary Building
Architecture from west Europe - Poland
High resolution of texture: 4096x4096
Originally created with 3ds Max 2014.
Unit system is set to centimetre.
Model is built to real-world scale
Texture Set PBR: Diffuse, Base Color, IOR, Gloss, Heigh, IOR, Normal, Reflection, Specular, Opacity
Previews rendered in Mormoset Toolbag and 3ds Max 2014 using V-ray Adv 2.3.
.obj/fbx format is recommended for import in other 3d software. If your software doesn’t support .obj format, please use .3ds/fbx format;
.obj, format was exported from 3ds Max. The geometry for .obj format is set to quads. .max files can be loaded in 3ds Max 2014 or higher.
In order to use Vray rendering setups and materials, V-ray Adv 2 or higher is required
- Grannary - Buy Royalty Free 3D model by danielmikulik 3D Model is ready to download for free, this model contains 28344 polygons.
Model's Description:
Edward Sitek Polish ww2 Resistance SMG 3D Model.
Download Edward Sitek Polish ww2 Resistance SMG in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
A 3d model based on a museum example of a sten like submachinegun in the Polish military museum in Warsaw, the submachinegun or “SMG” was made by Edward Sitek a member of the Polish resistance during the Nazi occupation of Poland in ww2 most likely by hand and out of scrap metal with minimal tools.
The design of the submachinegun is most likely based on the famous British Sten gun mixed with the Polish Mors smg, there is also from the looks of it some Russian ppsh 41 influence of the gun as the what could be a safety, fire selector or both look fairly similar to the ppsh 41s fire selector. Not much else is known of the gun as the museum exhibit does not tell you much, no idea what the fire rate was or in what cartridge it was chambered in, my guess is that it’s in the ever popular 9x19 parabellum or “9mm” cartridge as the dimensions seem right to me 3D Model is ready to download for free, this model contains 48635 polygons.