Model's Description:
WSK Mikrus MR-300 passenger car 3D Model.
Download WSK Mikrus MR-300 passenger car in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The Mikrus MR300 design was developed in 1957 by a team of designers from the Transport Equipment Factories in Mielec and Rzeszów. The Mikrus had a monocoque body and independent suspension of each wheel. It was propelled by a two-cylinder, two-stroke Mi300 engine designed especially for this vehicle and placed at the rear. In terms of the solutions adopted, just like the Goggomobil, the Mikrus was a miniature version of a passenger car without the use of any motorcycle parts. The design was highly simplified and consisted only of a speedometer with an odometer, control lights, an ignition switch with a starter motor switch, and a spare wheel. The complete, ready-to-drive structure weighed only 472 kg. The body has an interesting monocoque structure, built with the help of aviation technologies.
Manufacturer: Transport Equipment Factory in Mielec, 1959
Inv. No.: MIM28/II-1
Model prepared on the basis of photogrammetric and ToF measurements
Licence: CC BY-NC-SA - WSK Mikrus MR-300 passenger car - Download Free 3D model by Museum of Engineering and Technology, Krakow (@mitkrakow) 3D Model is ready to download for free, this model contains 551602 polygons.
Model's Description:
Lajkonik’s costume by Stanisław Wyspiański 3D Model.
Download Lajkonik’s costume by Stanisław Wyspiański in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The costume of Lajkonik, also called the Zwierzyniec Horse, designed by Stanisław Wyspiański in 1904.
ID no.: MHK-60/X a/1-13
Museum: Historical Museum of the City of Kraków
https://muzea.malopolska.pl/en/objects-list/613
Object copyright: Historical Museum of the City of Kraków
Digitalisation: RDW MIC, Małopolska’s Virtual Museums project - Lajkonik’s costume by Stanisław Wyspiański - Download Free 3D model by Virtual Museums of Małopolska (@WirtualneMuzeaMalopolski) 3D Model is ready to download for free, this model contains 632257 polygons.
Model's Description:
Syrena 105 passenger car 3D Model.
Download Syrena 105 passenger car in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The Syrena 105 is a small-engine passenger car manufactured between 1972-83. Along with the model 105L and derivative versions – the R20 and 105B commercial vehicles – it represents the last development stage of the Syrena, which had been in production since 1957.
The Syrena 105 can carry four s. It has a body-on-frame design and a two-door sedan body. The car is propelled by a three-cylinder, two-stroke engine connected to a four-speed transmission that drives the front wheels.
The design of Syrena 105 and 105L was created in the Passenger Car Research and Development Centre of the Fabryka Samochodów Osobowych in Warsaw as the startup model for the Fabryka Samochodów Małolitrażowych in Bielsko-Biała. In total, 347,648 units were built of the Syrena 105, 105L and R20, and 105B commercial vehicle variants.
Manufacturer: Fabryka Samochodów Małolitrażowych in Bielsko-Biała; 1973.
Inv. No.: MIM293/II-33
Model prepared on the basis of photogrammetric and ToF measurements
Licence: CC BY-NC-SA - Syrena 105 passenger car - Download Free 3D model by Museum of Engineering and Technology, Krakow (@mitkrakow) 3D Model is ready to download for free, this model contains 449399 polygons.
Model's Description:
Warszawa M20 model 200 passenger car 3D Model.
Download Warszawa M20 model 200 passenger car in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The Warszawa M-20 model 200 passenger car, manufactured between 1957-60, is a version of the Warszawa M20, which itself was manufactured from 1951 on a licence from the Soviet Union but modernised by Polish designers. It has a design typical of the 1940s, with a classical drivetrain arrangement.
An inline, four-cylinder flathead petrol engine is placed at the front and is connected to a three-speed transmission that propels the rear axle via a propeller shaft. The front suspension is independent. It has a multilink design with a stabiliser bar. At the rear, a rigid axle was suspended on leaf springs. The front part of the monocoque body has a subframe at the front to which the suspension and driveline components are mounted. The dual-circuit, hydraulic brake system uses brake drums and operates on all four wheels of the vehicle.
Manufacturer: FSO in Warsaw,1959
Inv. No.: MIM237/II-14
Model prepared on the basis of photogrammetric and ToF
measurements
Licence: CC BY-NC-SA - Warszawa M20 model 200 passenger car - Download Free 3D model by Museum of Engineering and Technology, Krakow (@mitkrakow) 3D Model is ready to download for free, this model contains 487238 polygons.
Model's Description:
Polonez ambulance/van, prototype 3D Model.
Download Polonez ambulance/van in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The Polonez ambulance/van is a light delivery vehicle based on the design and components of the FSO Polonez passenger car. Developed between 1985 and 1990 by the Zakład Samochodów Dostawczych in Nysa, the vehicle was intended to be mainly used for sanitary transportation. Over time it was to replace the outdated Nysa 522.
The prototype had a mixed structure: the body front was monocoque, the cargo space was based on a frame. The roof of both parts of the vehicle had a flexible connection with a stress and vibration damper – a solution that was patented.
Despite the favourable results of the prototype testing it was never launched into mass production.
Manufacturer: Zakład Samochodów Dostawczych in Nysa, 1988
Inv. No.: MIM1184/II-116
Model prepared on the basis of photogrammetric and ToF measurements
Licence: CC BY-NC-SA - Polonez ambulance/van, prototype - Download Free 3D model by Museum of Engineering and Technology, Krakow (@mitkrakow) 3D Model is ready to download for free, this model contains 567770 polygons.
Model's Description:
Ruins of the Ogrodzieniec castle 3D Model.
Download Ruins of the Ogrodzieniec castle in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
Photoscan of castle based in Ogrodzieniec / Poland 3d Scanned with DJI Mavic mini SE and Reality Capture
Description:
Ogrodzieniec Castle is a ruined medieval castle in the south-central region of Poland called Polish Jura. Originating in the 14th century the castle was rebuilt several times in its long history. It is situated on the top of 515.5-metre-high Castle Mountain (Polish: Góra Zamkowa), the highest hill of the Kraków-Częstochowa Upland. The ruins are open to visitors and are a part of Trail of the Eagles’ Nests, a hiking trail that connects a number of well known castles in the region.
Zamek Ogrodzieniec – ruiny zamku leżącego na Jurze Krakowsko-Częstochowskiej, wybudowanego w systemie tzw. Orlich Gniazd, we wsi Podzamcze w województwie śląskim, w powiecie zawierciańskim, około 2 km na wschód od Ogrodzieńca. Zamek został wybudowany w XIV–XV w. przez ród Włodków Sulimczyków.
Text Source: Wikipedia
Published by 3ds Max - Ruins of the Ogrodzieniec castle - Buy Royalty Free 3D model by Marcin Lubecki (@Lubus) 3D Model is ready to download for free, this model contains 500070 polygons.
Model's Description:
Łucznik KL 82/83 sewing machine 3D Model.
Download Łucznik KL 82/83 sewing machine in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The device was designed as a straight-seam machine for sewing light- and medium-weight fabrics such as canvas, silk, wool, and cotton. It stitched forwards and in reverse depending on the position of the seam control lever. The direction of stitching could be changed while sewing. The arm was cast in cast-iron and weighed around 14 kg. A small inspection hole was placed at the back of the machine arm. The needle arm mechanism was covered with a shield. The KL 82/83 model presented here resembles the design of Singer #15 and Pfaff 30 machines. The devices were manufactured in two colours: black with gilded patterns or, as seen in the unit presented here, in a hammered grey coating. The machine has a motor socket, which suggests that it could be adapted to use electrical drive.
Manufacturer: Zakłady Metalowe im. gen. Waltera in Radom, 1958
Inv. No. MIM1353 /IX-134
Model prepared on the basis of photogrammetric measurements
Licence: CC BY-NC-SA (CC Attribution-NonCommercial-ShareAlike) - Łucznik KL 82/83 sewing machine - Download Free 3D model by Museum of Engineering and Technology, Krakow (@mitkrakow) 3D Model is ready to download for free, this model contains 231557 polygons.
Model's Description:
Saneta electrotherapy device 3D Model.
Download Saneta electrotherapy device in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The Saneta apparatus was used for therapeutic electrical body massage with a high frequency current of between 100 and 250 V.
The device presented here consists of a high voltage generator connected to a Tesla transformer built into a handle, which serves as the grip for the replaceable glass electrode. The electrodes were filled with an inert gas, usually neon or argon. In operation, the gas shone violet, blue, or pink. The user massaged the skin with the electrode, causing a flow of high frequency alternating current through the body. When the electrode was held close to the skin the patient felt tingling, and when in contact with the skin - warmth. Electrotherapy devices were very popular in the 1920s and 1930s. They were used in clinics, by doctors, natural therapists, and regular people.
Manufacturer: ETA, lata 20./30. XX w.
Inv. No.: MIM1254/IX-108
Model prepared on the basis of photogrammetric measurements
Licence: CC BY-NC-SA - Saneta electrotherapy device - Download Free 3D model by Museum of Engineering and Technology, Krakow (@mitkrakow) 3D Model is ready to download for free, this model contains 488668 polygons.
Model's Description:
Grunwald Monument in Krakow, Poland 3D Model.
Download Grunwald Monument in Krakow in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The Grunwald Monument is an equestrian statue of King of Poland Władysław II Jagiełło (1352–1434) located at Matejko Square in Krakow’s Old Town and constructed in 1910 to commemorate the 500th anniversary of the Battle of Grunwald (1410). It was designed by Polish sculptor Antoni Wiwulski and Franciszek Black and funded by renowned pianist and future Prime Minister of Poland, Ignacy Jan Paderewski. The monument was destroyed in 1939 by Nazi Germans and reconstructed in 1976 according to project by Marian Konieczny.
Pomnik Grunwaldzki - pomnik konny króla Władysława II Jagiełły (1352–1434) w Krakowie, znajdujący się na placu Jana Matejki. Został wzniesiony w 1910 z fundacji Ignacego Jana Paderewskiego według projektu Antoniego Wiwulskiego i Franciszka Blacka w 500. rocznicę bitwy pod Grunwaldem (1410). Pomnik został zburzony w 1939 przez Niemców, zrekonstruowany w 1976 według projektu Mariana Koniecznego 3D Model is ready to download for free, this model contains 1010254 polygons.
Model's Description:
MK 235 cassette recorder 3D Model.
Download MK 235 cassette recorder in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The MK 235 cassette recorder (sometimes referred to as “ZRK MK 235” or “MK 235 Automatic”) was manufactured in 1976-1978. The portable cassette recorder, positioned on the boundary of popular and standard product classes, was designed to record sound and play back recordings. Its design was based on the licensed C-235 model by Grundig. It incorporated transistors and an integrated circuit. The MK 235 is powered from an AC source or batteries (five R14 type batteries). Operation time using batteries is about 14 hours. The tape recorder is designed to play cassettes at a tape speed of 4.75 cm/s. The aesthetics of the device are minimalistic, dominated by the geometry of its overall shape. Its form is livened up by the rounding of its edges, using geometric shapes and grooves to divide the planes.
Manufacturer: Zakłady Radiowe im. Marcina Kasprzaka, 1978
Inv. No.: MIM 1317/V-295
Model prepared on the basis of photogrammetric measurements
Licence: CC BY-NC-SA - MK 235 cassette recorder - Download Free 3D model by Museum of Engineering and Technology, Krakow (@mitkrakow) 3D Model is ready to download for free, this model contains 74987 polygons.
Model's Description:
Boss3_Idle 3D Model.
Download boss3_Idle in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
Boss3_Idle - boss3_Idle - Buy Royalty Free 3D model by migo1942 3D Model is ready to download for free, this model contains 48438 polygons.
Model's Description:
Singer, kl. 15-30 sewing machine 3D Model.
Download Singer in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The Singer kl. 15-30 sewing machine was designed for use in homes and in small sewing workshops. The body and plinth of the machine were made of cast iron covered in black lacquer. The entire machine was richly adorned with decal patterns named Gingerbread or Tiffany. The heavy arm of the machine was placed in a model 22 wooden cabinet. The richly decorated, Victorian-style cabinet doubled as a piece of furniture when the machine was not in use. A special mechanism in the form of a button placed at the front of the machine, on the upper right door, enables the machine arm to be retracted or pulled out. The housing has five drawers which could be locked with a key from the inside. The front and side panels are designed so that they can be opened, which facilitated access to the pedal mechanism.
Manufacturer: The Singer Manufacturing Company, 1908-1910, Wittenberg, Germany
Inv. No.: MIM999/IX-60
Model prepared on the basis of photogrammetric measurements
Licence: CC BY-NC-SA - Singer, kl. 15-30 sewing machine - Download Free 3D model by Museum of Engineering and Technology, Krakow (@mitkrakow) 3D Model is ready to download for free, this model contains 229833 polygons.
Model's Description:
Atari 65XE computer set 3D Model.
Download Atari 65XE computer set in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The Atari 65XE computer of 1985 is one of nine 8-bit Atari microcomputer models manufactured in 1979-1987 as part of the XL and XE series. The Atari 65XE is a computer equipped with 64kB of RAM, 24kB of ROM memory, and a MOS 6502C CPU. It was manufactured in four versions, differing in the motherboard used. In the Atari 65XE, in line with the design standards of the 1980s, the main components are enclosed in a housing that also contains a four-row keyboard with a space bar in a separate line. To make the device work it was necessary to use the ports at the back to connect a monitor (or TV), a storage device (cassette tape recorder, a floppy disk drive, or a cartridge reader), and peripherals such as joysticks. The latter were based on the hand controller mechanism developed by Louis Blériot in 1909.
Manufacturer: Atari Corporation
Inv. No.: MIM1726/VII-137
Model prepared on the basis of photogrammetric measurements
Licence: CC BY-NC-SA (CC Attribution-NonCommercial-ShareAlike) - Atari 65XE computer set - Download Free 3D model by Museum of Engineering and Technology, Krakow (@mitkrakow) 3D Model is ready to download for free, this model contains 344864 polygons.