Model's Description:
ALQ-184 (V) SHORT 3D Model, Fully textured with UV Mapping and materials.
Download
ALQ-184 (V) SHORT in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The AN/ALQ-184 is a self-defense electronic countermeasures pod used on USAF tactical aircraft. It operates in both receive and transmit modes to selectively direct high power jamming against multiple emitters. This system is very reliable detecting potential threats. The ALQ-184 is available in two-(Mid and High band) and three-band (Mid, High and Low band) configurations. It was designed as the replacement for the AN/ALQ-119 and AN/ALQ-131 electronic warfare pods. This model represents the version of two bands. The model has been built based on photographs and diagrams without scale found on the internet and therefore it is not an exact representation of the real device 3D Model is ready to download for free
with 18 Texture files attached, this model contains 3546548 polygons and 1763754 vertices.
Model's rating is (3) based on 20 Votes.
Model's Description:
Warhammer 40000 3D Model.
Download Warhammer 40000 in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
Blood for the Blood God! Skulls for the Skull Throne! - Warhammer 40000 - Warrior of Khorne - 3D model by vlabutenkov 3D Model is ready to download for free, this model contains 165419 polygons.
Model's Description:
Cat Warriors 3D Model.
Download Cat Warriors in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
这是一只猫战士,身经百战的他无惧任何挑战,他的眼里只有胜利,没有失败!不同于其他的英雄,机敏的作战风格是他惯用的套路
This is a cat warrior, experienced he is not afraid of any challenge, his eyes only victory, no failure! Unlike other heroes, agile fighting style is his usual routine
- Cat Warriors - Download Free 3D model by Hipuff (@Paofu) 3D Model is ready to download for free, this model contains 9614 polygons.
Model's Description:
[INITIAL D X NFS MW]FujiwaraTofuShop-BMW M3GTR 3D Model.
Download [INITIAL D X NFS MW]FujiwaraTofuShop-BMW M3GTR in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
Try to do this again with PBR and make some small changes
https://sketchfab.com/3d-models/initial-dfujiwaratofushop-ae86-b3cbc4e283fb4289a7241463b6802cf1 - [INITIAL D X NFS MW]FujiwaraTofuShop-BMW M3GTR - 3D model by 972XPc (@Sowhat0) 3D Model is ready to download for free, this model contains 16887 polygons.
Model's Description:
Animals: Bat Swarm 3D Model.
Download Animals: Bat Swarm in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
Animals: Bat Swarm - 3D model by Klaudia Naumann (@klaudia_naumann) 3D Model is ready to download for free, this model contains 2950 polygons.
Model's Description:
Warper 3D Model.
Download Warper in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
Subnauticagame.com - Warper - 3D model by Fox3D 3D Model is ready to download for free, this model contains 11812 polygons.
Model's Description:
Panda Warrior 3D Model.
Download Panda Warrior in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
Summoners War Panda Warrior 3D Model is ready to download for free, this model contains 2190 polygons.
Model's Description:
Underground Bunker Warehouse 3D Model.
Download Underground Bunker Warehouse in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
Underground Bunker Warehouse - Underground Bunker Warehouse - Buy Royalty Free 3D model by jimbogies 3D Model is ready to download for free, this model contains 23664 polygons.
Model's Description:
Abandoned Warehouse Building 3D Model.
Download Abandoned Warehouse Building in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
Abandoned Warehouse Building
Check out my other WAREHOUSE BUILDINGS and more indoor scenes if you like this one. Don’t forget to LIKE my models and FOLLOW me!
Feel free to make suggestions in the comment section if you have a cool idea for my next warehouse model!
Thank You! - Abandoned Warehouse Building - Buy Royalty Free 3D model by jimbogies 3D Model is ready to download for free, this model contains 311608 polygons.
Model's Description:
Star Wars TIE Fighter 3D Model.
Download Star Wars TIE Fighter in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The only thing I couldn’t replicate in this scene was the engine whine.
The symbol of the Empire - second model of my high-poly Star Wars series.
Maya
Photoshop
Substance Painter - Star Wars TIE Fighter - 3D model by Jesse Abraham (@artofruin3d) 3D Model is ready to download for free, this model contains 62527 polygons.
Model's Description:
AIM-9M SIDEWINDER 3D Model.
Download AIM-9M SIDEWINDER in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The AIM-9 Sidewinder (for Air Intercept Missile) is a short-range air-to-air missile which entered service with the US Navy in 1956 and subsequently was adopted by the US Air Force in 1964. Since then the Sidewinder has proved to be an enduring international success, and its latest variants remain standard equipment in most western-aligned air forces.[3] The Soviet K-13, a reverse-engineered copy of the AIM-9, was also widely adopted by a number of nations. (Wikipedia)
The details of the model are not exact since it is based on photographs from the internet and not on engineering drawings - AIM-9M SIDEWINDER - 3D model by Edgar Brito (@e.brito) 3D Model is ready to download for free, this model contains 1499252 polygons.
Model's Description:
GBU 31(V) 3/B JDAM 3D Model.
Download GBU 31(V) 3/B JDAM in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The designation GBU-31(V)/B was allocated to 2000 lb class JDAM bombs with guidance kits from Boeing. At least two different types of warhead can be used with the 2000 lb JDAM tailkits
• MK 84: Standard 2000 lb LDGP (Low-Drag General Purpose) bomb
• BLU-109: Instead of the MK 84.The BLU-109/B is a hardened penetration bomb with 2000 lb nominal weight.
it is intended to smash through concrete shelters and other hardened structures before exploding
There are four variants:
• GBU-31 (V) 1/B MK 84 Bomb body
• GBU-31 (V) 2/B MK 84 Bomb body with Navy thermal coating
• GBU-31 (V) 3/B BLU-109 Bomb body
• GBU-31 (V) 4/B BLU-109 Bomb body with Navy thermal coating
• About the Models: Modeling was done in Autocad and imported into 3ds max
The model was built using information, photos and images from internet, therefore its geometry and details are not engineering correct or exact.
It is a personal artistic interpretation
It is a high poly model not suitable for games - GBU 31(V) 3/B JDAM - 3D model by Edgar Brito (@e.brito) 3D Model is ready to download for free, this model contains 899432 polygons.
Model's Description:
GBU-49-B PAVEWAY II RAYTHEON DMLGB-BENT CONNECT 3D Model.
Download GBU-49-B PAVEWAY II RAYTHEON DMLGB-BENT CONNECT in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
GBU-49 Enhanced Paveway II
The GBU-49 PAVEWEAY by Raytheon Tecnologies also known as EGBU-12 Paveway II, Enhanced Paveway II and EP2 is a dual-mode guided bomb designed to effectively operate in all-weather conditions. Laser-guided GBU-12s can only operate in optimal weather conditions endangers the laser beam which guides the bomb through its intended target. EGBU-12s, which were introduced in 2001 during operation Enduring Freedom in Afghanistan, relies on semi-active laser guidance and Global Positioning System (GPS) aided inertial guidance system to seamlessly hit the target. The GPS guides the bomb in poor weather conditions and laser guidance aides engaging mobile targets of opportunity.
This model is presented with bent connection from the front guide kit to the rear wing kit. (Probably RAF version) - GBU-49-B PAVEWAY II RAYTHEON DMLGB-BENT CONNECT - 3D model by Edgar Brito (@e.brito) 3D Model is ready to download for free, this model contains 987742 polygons.
Model's Description:
AGM 130A MISSILE 3D Model.
Download AGM 130A MISSILE in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The AGM-130 was a powered air-to-ground guided missile developed by USA. Developed in 1984, it is effectively a rocket-boosted version of the GBU-15 bomb. It first entered operational service on 11 January 1999, and was retired in 2013. 502 were produced.
The AGM-130 is a powered air-to-surface missile designed for strikes at long range against various targets. It is essentially a rocket-boosted version of the GBU-15 bomb, with the rocket motor increasing the launch range and so giving the launch aircraft protection from whatever defenses may protect the target.
(Wikipedia)
The AGM-130 has two variants: the AGM-130A with a MK-84 blast/fragmentation warhead and the AGM-130C with a BLU-109 penetrator.
(https://www.boeing.com/history/products/gbu-15-agm-130-weapon-system.page)
The model was built using information, photos and images from internet, therefore its geometry and details are not engineering correct or exact.
It is a personal artistic interpretation
It is a high poly model not suitable for games - AGM 130A MISSILE - 3D model by Edgar Brito (@e.brito) 3D Model is ready to download for free, this model contains 1518628 polygons.
Model's Description:
AIM-120 AMRAAM 3D Model.
Download AIM-120 AMRAAM in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The AIM-120 Advanced Medium-Range Air-to-Air Missile, or AMRAAM (pronounced AM-ram), is an American beyond-visual-range air-to-air missile (BVRAAM) capable of all-weather day-and-night operations. Designed with a 7-inch (180 mm) diameter, and employing active transmit-receive radar guidance instead of semi-active receive-only radar guidance, it has the advantage of being a fire-and-forget weapon when compared to the previous generation Sparrow missiles. When an AMRAAM missile is launched, NATO pilots use the brevity code Fox Three
(Wikipedia) - AIM-120 AMRAAM - 3D model by Edgar Brito (@e.brito) 3D Model is ready to download for free, this model contains 765084 polygons.
Model's Description:
GBU-38 JDAM Bomb 3D Model.
Download GBU-38 JDAM Bomb in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The designation GBU-38(V)/B was allocated to 500 lb class JDAM bombs with guidance kits from Boeing. At least two different types of warhead can be used with the 500 lb JDAM tailkits
• MK 82: Standard 500 lb LDGP (Low-Drag General Purpose) bomb
• BLU-111/B: Instead of the MK 82, the BLU-111/B warhead can also be used in the GBU-38/B series JDAMs. The BLU-111/B is externally identical to the MK 82, but uses the PBXN-109 thermally insensitive explosive - GBU-38 JDAM Bomb - 3D model by Edgar Brito (@e.brito) 3D Model is ready to download for free, this model contains 604442 polygons.
Model's Description:
GBU-54 3D Model.
Download GBU-54 in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The GBU-54(V)/B by Boeing is the Laser JDAM variant of the GBU-38(V)/B 500 lb. class JDAM. It consists of a GBU-38(V)/B bomb fitted with a DSU-38/B laser homing target detection device.
That is why they look similar, one can easily distinguish one from the other, because the GBU-54 has a connector that connects the DSU-38 / B with the tail assembly.Instead of the MK 82, the BLU-111/B warhead can also be used in the GBU-38/B series JDAMs. The BLU-111/B is externally identical to the MK 82, but uses the PBXN-109 thermally insensitive explosive
This model was built by interpreting photographs and images available on the internet and therefore its dimensions and details are not exact.
I make these models as a hobby 3D Model is ready to download for free, this model contains 946372 polygons.
Model's Description:
AN-AAQ-28 LITENING G4 3D Model.
Download AN-AAQ-28 LITENING G4 in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The AN/AAQ-28 LITENING is a multipurpose targeting and navigation pod designed to provide tactical aircraft with 24-hour precision strike capability against both land and sea based targets. Originally, it was developed by Rafael Advanced Defense Systems for servicing on the Israel Air Force tactical aircraft. In 1995 Northrop-Grumman joined Rafael boosting the LITENING product development which led to the more capable LITENING II available from 1999. (Deagel.com) - AN-AAQ-28 LITENING G4 - 3D model by Edgar Brito (@e.brito) 3D Model is ready to download for free, this model contains 1107724 polygons.
Model's Description:
RECCELITE reconnaissance pod 3D Model.
Download RECCELITE reconnaissance pod in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The Reccelite is an electro-optical (IR+CCD-TV) tactical reconnaissance pod designed to operate 24 hours a day in adverse weather conditions. It provides real-time imagery via built-in data-link communications. The Reccelite developed by Rafael Advanced Defense Systems shares many components from LITENING targeting pod (Deagel.com) 3D Model is ready to download for free, this model contains 1049782 polygons.