Model's Description:
Low Poly Car 3D Model.
Download Low Poly Car in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The Ford Consul Classic is a mid-sized car that was launched in May 1961 and built by Ford UK from 1961 to 1963. It was available in two or four door saloon form, in Standard or De Luxe versions, and with floor or column gearshift. The name Ford Consul 315 was used for export markets. The Ford Consul Capri was a 2-door coupé version of the Classic, and was available from 1961 until 1964.
The 1,340 cc (82 cu in) four-cylinder pre-crossflow Kent engine was replaced in August 1962 by an over-square 1,498 cc (91.4 cu in) engine with a new five-bearing crankshaft and a new gearbox with synchromesh on all four forward ratios. Steering and suspension also received “greased for life” joints.
It is sometimes referred to as the Ford 109E, though that was only one of four such codes utilized for the Consul Classic, as explained below. Obvious competitor models at the time included the Hillman Minx and Singer Gazelle from Rootes Group 3D Model is ready to download for free, this model contains 13922 polygons.
Model's Description:
Warszawa M20 model 200 passenger car 3D Model.
Download Warszawa M20 model 200 passenger car in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The Warszawa M-20 model 200 passenger car, manufactured between 1957-60, is a version of the Warszawa M20, which itself was manufactured from 1951 on a licence from the Soviet Union but modernised by Polish designers. It has a design typical of the 1940s, with a classical drivetrain arrangement.
An inline, four-cylinder flathead petrol engine is placed at the front and is connected to a three-speed transmission that propels the rear axle via a propeller shaft. The front suspension is independent. It has a multilink design with a stabiliser bar. At the rear, a rigid axle was suspended on leaf springs. The front part of the monocoque body has a subframe at the front to which the suspension and driveline components are mounted. The dual-circuit, hydraulic brake system uses brake drums and operates on all four wheels of the vehicle.
Manufacturer: FSO in Warsaw,1959
Inv. No.: MIM237/II-14
Model prepared on the basis of photogrammetric and ToF
measurements
Licence: CC BY-NC-SA - Warszawa M20 model 200 passenger car - Download Free 3D model by Museum of Engineering and Technology, Krakow (@mitkrakow) 3D Model is ready to download for free, this model contains 487238 polygons.
Model's Description:
Low Poly Car 3D Model.
Download Low Poly Car in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The Alfa Romeo 4C (Type 960) is a mid-engined sports car produced by Italian car manufacturer Alfa Romeo. Unveiled at the 2013 Geneva Motor Show, the 4C was initially only available as a coupé, with a spider body style coming a few years later in 2015. The name 4C refers to the four-cylinder engine.
The Alfa Romeo 4C Concept is a two-seater, rear-wheel drive coupé with technology and materials derived from the Alfa Romeo 8C Competizione, with a 1750 cc turbo petrol engine with direct injection, the “Alfa TCT” twin dry clutch transmission, and the Alfa DNA dynamic control selector.
The 4C concept version was unveiled in the 81st Geneva Motor Show in March 2011, followed by the Mille Miglia 2011 parade, Goodwood Festival of Speed 2011, 2011 Frankfurt Motor Show.
It was displayed for the first time outside in Concorso d’Eleganza Villa d’Este in 2012. Compared to the production version, it is very similar, with the biggest differences being front lights, side vents and mirrors 3D Model is ready to download for free, this model contains 15076 polygons.
