Model's Description:
Boeing VC-137C Air Force One 3D Model, Fully textured with UV Mapping and materials.
Download
Boeing VC-137C Air Force One in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
Purchase link is here https://www.artstation.com/artwork/LeEbZR SAM 26000 was the first of two Boeing VC-137C United States Air Force aircraft specifically configured and maintained for use by the president of the United States. It used the callsign Air Force One when the president was on board, otherwise SAM 26000 , with SAM indicating Special Air Mission. A VC-137C with Air Force serial number 62-6000,[a] SAM 26000 was a customized Boeing 707. It entered service in 1962 during the administration of John F. Kennedy and was replaced in presidential service in 1972 but kept as a backup. The aircraft was finally retired in 1998 and is now on display at the National Museum of the United States Air Force near Dayton, Ohio. 3D Model is ready to download for free
with 8 Texture files attached, this model contains 125553 polygons and 68595 vertices.
Model's rating is (3.5) based on 68 Votes.
Model's Description:
Boeing B-52H Stratofortress 3D Model, Optimized by RigModels.com, Fully textured with UV Mapping and materials.
Download Boeing B-52H Stratofortress in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
Purchase link is here https://www.artstation.com/artwork/3qqVYD
The Boeing B-52 Stratofortress is an American long-range, subsonic, jet-powered strategic bomber. It has been operated by the United States Air Force (USAF) since the 1950s. The bomber is capable of carrying up to 70,000 pounds (32,000 kg) of weapons, and has a typical combat range of more than 8,800 miles (14,080 km) without aerial refueling.
The B-52H had the same crew and structural changes as the B-52G. The most significant upgrade was the switch to TF33-P-3 turbofan engines. The ECM and avionics were updated, a new fire control system was fitted, and the rear defensive armament was changed from machine guns to a 20 mm M61 Vulcan cannon (later removed in 1991–94). The aircraft’s first flight occurred on 10 July 1960, and it entered service on 9 May 1961. This is the only variant still in use. A total of 102 B-52Hs were built. The last production aircraft, B-52H AF Serial No. 61-0040, left the factory on 26 October 1962. 3D Model is ready to download for free, this model contains 144929 polygons.
Model's Description:
Boeing F/A-18F Super Hornet - Free 3D Model, Optimized by RigModels.com, Fully textured with UV Mapping and materials.
Download Boeing F/A-18F Super Hornet - Free in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
Can’t be used in any commercial work, only for personal use!
The Boeing F/A-18F Super Hornet is a supersonic twin-engine, carrier-capable, multirole fighter aircraft variant derived from the McDonnell Douglas F/A-18 Hornet series. The F/A-18F tandem-seat variant is a larger and more advanced versions of the F/A-18C and D Hornet.
Designed and initially produced by McDonnell Douglas, the Super Hornet first flew in 1995. Full-rate production starting in September 1997, after the merger of McDonnell Douglas and Boeing the previous month. The Super Hornet entered fleet service with the United States Navy in 1999, replacing the Grumman F-14 Tomcat, which was retired in 2006. RAAF Super Hornets entered service in December 2010. In February 2023, Boeing announced plans to end production of the Super Hornet in 2025.
Render:
3D Model is ready to download for free, this model contains 49910 polygons.
Model's Description:
F-23A Black Widow II 3D Model, Optimized by RigModels.com, Fully textured with UV Mapping and materials.
Download F-23A Black Widow II in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
Theoretical production version of the F-23 Black Widow based off of Northrop Grumman production drawings. 3D Model is ready to download for free, this model contains 274337 polygons.
Model's Description:
Boeing RC-135 3D Model, Optimized by RigModels.com, Fully textured with UV Mapping and materials.
Download Boeing RC-135 in various files formats such as Wavefront Object format, Autodesk FBX, DirectX 9.0, Stereo Lithography and HTML5 JSON format.
The Boeing RC-135 is a family of large reconnaissance aircraft built by Boeing and modified by a number of companies, including General Dynamics, Lockheed, LTV, E-Systems, and L3 Technologies, and used by the United States Air Force and Royal Air Force to support theater and national level intelligence consumers with near real-time on-scene collection, analysis and dissemination capabilities. Based on the C-135 Stratolifter airframe, various types of RC-135s have been in service since 1961. 3D Model is ready to download for free, this model contains 110231 polygons.
![Purchase link is here https://www.artstation.com/artwork/LeEbZR
SAM 26000 was the first of two Boeing VC-137C United States Air Force aircraft specifically configured and maintained for use by the president of the United States. It used the callsign Air Force One when the president was on board, otherwise SAM 26000 , with SAM indicating Special Air Mission.
A VC-137C with Air Force serial number 62-6000,[a] SAM 26000 was a customized Boeing 707. It entered service in 1962 during the administration of John F. Kennedy and was replaced in presidential service in 1972 but kept as a backup. The aircraft was finally retired in 1998 and is now on display at the National Museum of the United States Air Force near Dayton, Ohio.](3dmodel/fbd853d9f9c847edbc6d1e32de3d8698.jpeg "Boeing VC-137C Air Force One 3D Model")
